How To Remove A Youmaker Phone Case

UPDATED 12/17/2018

If you have an iPhone, yous more than likely utilize or volition use a case to protect it. That means, at some bespeak yous'll have to effigy out how to install your case and how to remove it. It may seem pretty directly forward merely if your case is super form fitting and/or a snap-on case, it might be a little more difficult than information technology seems. Skilful news though – it's non that difficult if you have some helpful tips. Better news – we accept all those helpful tricks laid out beneath in our step-by-step guides.

How to Put On an iPhone Case

Step 1 - preparing your workspace

1. Prepare past immigration off your workspace and laying downward a soft surface

Pull upward a seat up at the tabular array, move aside any unnecessary clutter and near importantly, cover your immediate workspace with something soft, similar a folded towel. The final thing y'all want to practise is drib your telephone on the flooring or a difficult surface and damage your device. (Let'due south not forget this the whole reason why you have a case to brainstorm with)

Step 2 - slip the top left corner on

2. Slip the iPhone into the elevation-left border of the case

Take hold of the example (opening side up) with your left hand and with your correct, catch the phone (screen side up). Slowly slide the tiptop left corner of your iPhone into the case towards the ringer and book button cut-outs/push covers. Don't worry if these elements aren't perfectly aligned at the moment – they will snap in place a little later on on. Gently pinch and concord this position with your left paw.

Step 3 - snap the top right corner on

3. Snap in the top-right corner, followed by the bottom-correct corner

With the summit-left corner withal insert and pinched, use your right hand to snap in the top-right corner of the instance. Then, slide your right mitt down the side of the phone and case applying abiding pressure, until y'all get to the lesser-correct corner. Now, give this corner a good stiff pinch between your index finger and thumb. It should snap right into place.

Step 4 - secure the final corner

iv. Secure and snap in the final, bottom-left corner

Depending on the phone case, securing the final corner may exist as uncomplicated as a gentle pinch on the last border. If not, and the corner of the example is folding underneath the phone, try using a business carte du jour to slide the example on the terminal edge. Slip the business card into the gap betwixt the iPhone and instance, and and so slowly movement information technology along the edge of the iPhone towards the final corner, while simultaneously working to snap the instance on. This works sort of like a shoe horn.

Step 5 - make sure cut outs are aligned

five. Confirm that all of the cut-outs and/or push covers align

At this point, the example should be fully installed, which ways all of the cutouts/push button covers properly align to all of the buttons and ports.

Pro-tip: Sometimes in the process of putting on your case, you may accidentally toggle the ringer on or off, so requite that a quick check.

---

Now that you lot have the instance on, it'due south inevitable that y'all will have to take if off at some point in the hereafter. Maybe you want to try a different instance or possibly y'all're looking to requite yours a quick make clean. Whatever the reason, if you need a simple how-to on safely removing your iPhone case, we can assist with that too. Nosotros're breaking down this process step-by-pace.

How to Take Off an iPhone Case

Step 1 - preparing your workspace

ane. Ready past clearing off your workspace and laying downward a soft surface

Much similar removing a case, information technology's important to get situated and properly set. So grab a seat, clear off your workspace and lay downwards a towel to create a soft, apartment working surface. The last thing you want to do when removing your case is to drop and crack your phone.

Step 2 - removing the corner diagonally opposite the volume buttons

two. Begin past removing the corner diagonally opposite to the volume buttons

Start past removing the corner of the case that is catty-corner to the ringer switch and volume buttons. Grab your phone like you're going to send a text and rotate it 180º, keeping the screen side upward. On this new, height-left corner, place both thumbs on the front of the instance and firmly pry the case away from the telephone. If this doesn't work, carefully endeavor using your fingernails, or a deadening object, to release the edges nearest to the corner.

Step 3 - remove adjacent corner

three. Remove the directly next corner

With the phone in the aforementioned position, apply the techniques mentioned above to remove the corner directly adjacent to the prior. The case should come off a picayune easier on this corner, and then accept extra precaution as to non drop your telephone.

Step 4 - slide the phone out of the case

4. Grab the phone and slide it out of the instance

With the 2 corners dislodged, gently hold the instance with 1 hand and with the other, go a firm grip on the freed function of the phone. Now, simply slide the phone out and away from the case.

Pro-tip: Double check that you didn't toggle the ringer switch or creepo up the volume in the process of removing your case.

---

So there yous take it. You're now an proficient at putting on and removing an iPhone case. If you lot have whatsoever problem, or helpful tips nosotros did not mention, we'd honey to hear from you lot. Just send an email to howdy@totalleecase.com